Product Selection & Applications Archives

What sensors can be used behind a compressor?

by Sarah Loeffler | Nov 25, 2025

I am assuming you want to measure parameters at the compressor outlet, but still before the filtration. This means you have wet air which might carry additional contaminations like oil or particles. For flow measurements: +Pitot Tube Flow Meter (S430): This is...

What are the typical conditions of air directly at the compressor outlet?

by Sarah Loeffler | Nov 25, 2025

The typical conditions of air directly at the compressor outlet are that it is wet and often dirty, primarily due to the presence of compressor oil. To ensure the quality of the compressed air, it must be filtered, and water and oil separators should be installed. The...

How to monitor differential pressure for a purification system?

by Sarah Loeffler | Nov 25, 2025

The purification system of a compressed air system consists out of staged filtration and drying systems. As the compressed air has to travel through filter elements, heat exchanges or desiccant layers with small diameters and many bends pressure is lost. Corrosion,...

Why there are particles in compressed air?

by Sarah Loeffler | Nov 25, 2025

Due to the fact that pollutants are in the ambient air which is sucked in by the compressor also the compressed air is loaded with dust, particles, humidity or oil vapors. Particles are harmful for many production processes, e. g. electronics industry, pharmaceutical...

What is the difference between standard, maximum and high speed range calibration?

by Sarah Loeffler | Nov 25, 2025

SUTO iTEC flow sensors are calibrated at almost real-world conditions in the lab. Several calibration points are used to achieve a good accuracy. Depending on the measuring range (Standard, Max, High-speed) the calibration and testing efforts in production are...

« Weitere Ergebnisse

What sensors can be used behind a compressor?Product Selection & Applications - Seite 1

What sensors can be used behind a compressor?

What are the typical conditions of air directly at the compressor outlet?

How to monitor differential pressure for a purification system?

Why there are particles in compressed air?

What is the difference between standard, maximum and high speed range calibration?

CONTACT

ACCESS TO RESTRICTED DOWNLOADS

Registration

Login