Suto Itec Logo 20 Years Yellow Final

What is the difference between atmospheric and pressure dew point? - Seite 1

Why has a dew point be checked at the point of use?

by | Nov 25, 2025

Due to the fact that the natural phenomena of equalization (balancing unstable conditions by flow) humidity from the ambient is able to penetrate compressed air piping even the air is pressurized. As a normal compressed air system has countless connection points...

Why Is Thermal Mass Flow Ideal for CDA Measurement?

by | Nov 25, 2025

The thermal mass flow principle measures the heat loss of a heated sensor a moving gas. Depending on the mass and the velocity of the gas passing through, the signal is proportional to the standard flow rate. This principle is very reliable over a wide range....

Why Straight Pipe Needed Before and After Flow Sensors?

by | Nov 25, 2025

In this particluar case a flow meter is used to determine the flow and the total consumption of compressed air. The flow Almost all modern flow sensors require a so-called fully developed flow profile for accurate measurement. This profile is disturbed by obstacles...

What is the difference between standard and actual flow?

by | Nov 25, 2025

The actual flow rate is the volume of a gas somewhere in the system, independent of its density, that flows through a certain point. The term actual flow rate is not clear, when it comes to the mass of a gas flowing through a given point, because gas is compressible....
×

ACCESS TO RESTRICTED DOWNLOADS

Thank you for contacting us via our homepage. You will receive your personal access code for our restricted downloads shortly.

Registration

PHP Captcha

Login